Galvo GVO1508 “Desert Sand” Coloured Steel Garden Shed

Customisation & Layout Options

The available information focuses on size and accessory options rather than layout changes. While you can tailor the interior to your needs using shelving, tool hooks, and floor or bolt‑down options, no details are provided about repositioning doors, windows, or other structural customisations for this model.

Optional Accessories & Add‑Ons

Enhance the practicality and organisation of your Galvo GVO1508 “Desert Sand” garden shed with purpose‑designed accessories:

• Wood Floor Kit
  Provides a solid timber surface inside the shed, ideal when you don’t have an existing concrete pad and want a clean, stable floor under your mower and tools.
• Concrete Floor Bolt Packages (Set of 8)
  Pre‑selected bolt packs for securing the shed to a concrete surface, available for both flat and recessed concrete floors to help anchor the shed safely in place.
• Cabin Hooks
  Simple hooks that hold the door open while you move gear in and out of the shed, helping prevent the door from swinging shut in the wind.
• Tool Hooks (Set of 4)
  Wall‑mounted hooks designed to keep rakes, spades, and other long‑handled tools up off the floor and neatly organised.
• Shelf Brackets (Supports 3 Shelves, Shelves Included)
  Bracket set with shelves included, creating convenient upper‑level storage for smaller items, spray bottles, and garden accessories.
• Quality Pop Riveter
  Riveting tool suited to fixing the shed’s steel panels together, useful if you don’t already own a pop riveter.

These sheds are designed to be DIY projects, however we also offer a full install service at fixed prices should you prefer someone else to do this for you. Typically a shed of this size would take one of the installers we use *one day*. See shed options for pricing.

DIY Build Information

This shed is designed as a straightforward kitset project for someone with good DIY skills. Wall sheets are joined with rivets, with top and bottom channels drilled and riveted. Once all wall and roof panels are assembled, you stand the wall panels, drill and rivet them together, then install the roof panels in the same manner. Flashings are drilled and riveted to finish the exterior, before assembling and hanging the door with the supplied hinges.

If you choose the optional floor kit, the precut runners and floorboards are simply nailed together with a hammer. When using a kitset floor, it should be built before starting assembly of the shed itself.

DIY Difficulty Rating

• Suited to a competent DIYer, recommended as a two‑part process: assemble panels, then stand and connect
• Approximate time allowance: about half a day for a competent DIYer

Tools Required

• Power drill
• 3.3mm drill bits
• Riveter
• Hammer (for optional floor kit)
• Tape measure
• Ladder or saw stool
• Non‑slip gloves
• Eye protection
• Saw horses

Assembly Instructions

No specific instruction link has been provided for this model. Please refer to the latest documentation supplied by the retailer or manufacturer with your purchase.