Galvo GVO1508 “Grey Friars” Coloured Steel Garden Shed

Customising Your Galvo GVO1508 Shed

This model is supplied as a fixed-size, kitset steel shed. The provided information does not specify options for repositioning doors or windows, altering roof style, or changing layout, so structural customisation is not indicated.

However, you can still tailor the interior to suit your storage needs through the available accessory range:

• Use shelf brackets and included shelves to create multi-level storage for smaller tools and garden products.
• Install tool hooks to hang long-handled tools and keep the limited floor space clear.
• Select the floor or concrete bolt options that best match your site, whether you prefer a timber floor kit or direct fixing to a concrete pad.

Optional Accessories & Add-Ons

Enhance the functionality and ease of installation of your Galvo GVO1508 “Grey Friars” shed with these purpose-designed accessories:

• Wooden Floor Kit
  Provides a solid, level timber base for your shed, helping protect stored items from ground moisture and creating a more comfortable, stable floor surface.
• Concrete Floor Bolt Package (set of 8)
  Available for flat or recessed concrete floors, this kit secures your shed to a concrete base to improve stability and wind resistance.
• Cabin Hook
  Keeps the shed door held open when needed, preventing it from blowing shut while you move tools and equipment in and out.
• Tool Hooks (set of 4)
  Allows you to hang tools off the wall, freeing up floor space and keeping frequently used items organised and easy to reach.
• Shelf Brackets (supports 3 shelves, shelves included)
  Adds multi-level storage for smaller items, helping you make better use of the shed’s vertical space.
• Quality Pop Riveter
  Dedicated riveter tool to speed up installation of the riveted wall and roof panels for a more efficient build.

These sheds are designed to be DIY projects, however we also offer a full install service at fixed prices should you prefer someone else to do this for you. Typically a shed of this size would take one of the installers we use *one day*. See shed options for pricing.

DIY Build & Installation

This shed is designed for straightforward installation by someone with good DIY skills. Wall sheets are joined with rivets, with top and bottom channels drilled and riveted. Once the wall and roof panels are assembled, the wall panels are stood up, drilled, and riveted together, and the roof panels are fixed in the same manner. Flashings are then drilled and riveted to the shed, and finally the door is assembled and fixed with the supplied hinges.

If you choose the optional floor kit, the precut runners and floorboards can be nailed together with a hammer. When using a kitset floor, it should be assembled before starting on the shed itself.

DIY Difficulty Rating

• Intermediate DIY level; best as a two-person job for handling panels safely
• Allow around half a day for installation for a competent DIYer

Tools Required

• Power drill
• 3.3mm drill bits
• Riveter
• Hammer (for floor kit)
• Tape measure
• Ladder or saw stool
• Non-slip gloves
• Eye protection
• Saw horses

Assembly Instructions

The latest installation instructions can be obtained from the supplier or retailer. No specific instruction link was provided in the source information.