Galvo GVO1508 Alu-Zinc Garden Shed

Customising the Galvo GVO1508 for Your Space

The Galvo GVO1508 Alu‑Zinc Garden Shed is a compact, fixed‑size model, but you still have options to tailor it to your needs:

• Steel Gauge Choice: Select between cost‑efficient 0.25mm steel or stronger 0.30mm high tensile steel to suit your budget and performance requirements.
• Colour Options: Available across the Galvo basic garden shed range in zinc or 5 colours, allowing you to match the shed to your home or garden setting.
• Flooring Setup: Choose a wood floor kitset or bolt‑down package for a concrete pad, depending on your site and foundation preference.
• Internal Layout: Configure the inside with optional tool hooks and shelving so you can keep long‑handled tools, smaller items, and bulkier gear separated and easy to access.

Optional Accessories & Add‑Ons

Enhance the functionality and usability of your Galvo GVO1508 Alu‑Zinc Garden Shed with purpose‑designed accessories:

• Wood Floor Kitset – Provides a solid timber floor platform, ideal where a concrete pad is not available or where you want a warmer, more forgiving surface underfoot.
• Concrete Floor Bolt Package (set of 8)
  • Bolts for a Flat Floor – Securely anchors the shed to a flat concrete surface for stability and safety.
  • Bolts for a Recessed Floor – Designed for recessed concrete slabs, helping to keep the shed firmly fixed in place.
• Cabin Hooks (1 or 2) – Holds the door open securely, preventing it from blowing shut in the wind and making access easier while you work.
• Tool Hooks Set (set of 4) – Keeps tools off the floor and neatly organised on the wall, freeing up valuable floor space.
• Shelf Brackets (supports 3 shelves, shelves included) – Creates additional storage levels for smaller items like pots, fertiliser, and hand tools, maximising vertical space.
• Quality Pop Riveter – A suitable riveter for assembling the shed’s riveted joints efficiently and securely.

These sheds are designed to be DIY projects, however we also offer a full install service at fixed prices should you prefer someone else to do this for you. Typically a shed of this size would take one of the installers we use *one day*. See shed options for pricing.

DIY Assembly & Build Information

Straightforward installation for someone with good DIY skills. Wall sheets are joined with rivets, and top and bottom channels are drilled and riveted. Once all wall and roof panels are joined together, stand the wall panels up, drill and rivet them together, then install the roof panels in the same manner. Finally, drill and rivet the flashings to the shed, make the door, and fix it with the supplied hinges. If using the optional floor kit, assemble the precut runners and floorboards with nails before you start on the shed.

• DIY difficulty rating: Intermediate level, typically a half‑day project for a competent DIYer; a two‑person lift is recommended for handling panels safely.

Tools Required

• Power drill
• 3.3mm drill bits
• Riveter
• Hammer (for floor kit)
• Tape measure
• Ladder or saw stool
• Non‑slip gloves
• Eye protection
• Saw horses

Assembly Instructions

For full, step‑by‑step instructions, refer to the latest manual here: Download Galvo GVO1508 Alu‑Zinc Garden Shed Instructions.