Galvo GVO2315 “Desert Sand” Coloured Steel Garden Shed

Customising Your Storage Setup

While the Galvo GVO2315 “Desert Sand” shed comes in a fixed size and roof style, you can still tailor how it works for your storage needs using the available accessories and floor options.

• Choose an optional wood floor kitset or bolt‑down kit to suit your base (timber floor or concrete pad).
• Add tool hooks to keep long‑handled tools and equipment organised and off the floor.
• Install shelf brackets and shelves to make better use of vertical wall space for smaller items.
• Use cabin hooks to hold the door open while you load or unload larger items like lawnmowers and outdoor furniture.

Accessories & Upgrades

Enhance the functionality and usability of your Galvo GVO2315 “Desert Sand” shed with the following optional accessories:

• Wood Floor Kitset
  Provides a solid timber floor surface, helping to protect stored items from ground moisture and creating a clean, stable base inside the shed.
• Concrete Floor Bolt Package (set of 8)
  Securely anchors the shed to a concrete base, improving stability and resistance to wind uplift. Available for flat or recessed concrete floors.
• Cabin Hooks
  Allows the shed door to be held open securely, improving safety and convenience when moving tools and equipment in and out.
• Tool Hooks (set of 4)
  Ideal for hanging tools and garden equipment off the floor, maximising usable space and keeping the shed tidy.
• Shelf Brackets (supports 3 shelves, shelves included)
  Creates additional shelving for smaller items, helping organise paints, sprays, hand tools and other accessories.
• Quality Pop Riveter
  Provides a suitable tool for fastening the rivets used in the shed’s construction, helping to make assembly more efficient.

These sheds are designed to be DIY projects, however we also offer a full install service at fixed prices should you prefer someone else to do this for you. Typically a shed of this size would take one of the installers we use *one day*. See shed options for pricing.

DIY Construction & Installation

Straightforward installation for someone with good DIY skills. The shed is assembled from steel wall and roof sheets joined with rivets, and top and bottom channels that are drilled and riveted together.

• Join wall sheets with rivets and fix to the top and bottom channels by drilling and riveting.
• Once wall and roof panels are assembled, stand the wall panels up, then drill and rivet them together.
• Fit the roof panels in the same manner, then drill and rivet the flashings to the shed.
• Assemble the door and fix it with the supplied hinges.
• If using the optional floor kit, the precut runners and floorboards can be nailed together with a hammer; assemble the floor before starting on the shed.

DIY Difficulty Rating

• Suitable for a competent DIYer; allow approximately one day for installation.

Tools Required

• Power drill
• Drill bits 3.3mm
• Riveter
• Hammer (for floor kit)
• Tape measure
• Ladder or saw stool
• Non‑slip gloves
• Eye protection
• Saw horses

Assembly Instructions

The latest assembly instructions for this shed were not supplied as a link in the source data.